California electrology written exam: 10 free practice questions

Ten real questions from our California electrology bank, with the keyed answer and an explanation for each. California contracts its written examination to PSI under the Board of Barbering and Cosmetology. No signup, nothing to install.

Get the full practice tests →

  1. Electrolysis Treatment and Analysis

    1. When treating an area with dense hair growth, the electrologist should:

    1. Space treatments across the area systematically, treating hairs in organized rows to track progress and avoid over-treatment.
    2. Treat only the outermost hairs around the perimeter of the dense area and leave the whole of its interior untreated.
    3. Randomly select hairs to treat, without an organized pattern, because systematic work on a dense area is unnecessary.
    4. Treat every visible hair in a single session without reference to the appointment length that was booked for the client.

    Answer: Space treatments across the area systematically, treating hairs in organized rows to track progress and avoid over-treatment.

    Systematic approach: work in organized rows or quadrants. Prevents missed areas and double-treatment. Track progress across sessions for complete coverage of the treatment zone.

  2. Electrolysis Treatment and Analysis

    2. The two energy conversions electrolysis uses to destroy the follicle are:

    1. Mechanical (the probe vibrating) and acoustic (sound waves loosening the bulb).
    2. Kinetic (the moving probe) and electrostatic (a static charge lifting the hair).
    3. Optical (pulses of light) and magnetic (a field that weakens the follicle wall).
    4. Chemical (galvanic current producing lye) and thermal (thermolysis making heat).

    Answer: Chemical (galvanic current producing lye) and thermal (thermolysis making heat).

    Electrolysis destroys the follicle in two ways: galvanic (direct) current converts to chemical energy, producing lye (sodium hydroxide) in the follicle, and thermolysis (high-frequency) current converts to heat. The blend method uses both. Vibration, sound, motion, static charge, light and magnetism are not how electrolysis destroys the follicle.

  3. Safety and Infection Control

    3. Needle holders (chucks) on the epilator should be:

    1. Shared between treatment rooms with the insulated shaft left uncleaned from client to client.
    2. Replaced only at the point of visible breakage and never on any routine cleaning schedule.
    3. Sterilized in the autoclave after every client in the manner that critical instruments require.
    4. Cleaned and disinfected between clients to prevent cross-contamination from surface contact.

    Answer: Cleaned and disinfected between clients to prevent cross-contamination from surface contact.

    Needle holders contact the non-inserted portion of the probe. They should be cleaned and disinfected between clients. While not penetrating skin, they are in the treatment field.

  4. Client Consultation and Hair and Skin Analysis

    4. A client over 65 years of age should be treated with awareness that:

    1. Older clients should receive the highest available intensity to overcome treatment-resistant follicles.
    2. Advanced age requires no modification of treatment because older skin shows no delay in wound healing.
    3. Aging skin may be thinner, drier, and slower to heal requiring lower intensity and careful monitoring.
    4. Aging skin may be too fragile, too dry, and too slow to heal, making electrolysis unsuitable for it.

    Answer: Aging skin may be thinner, drier, and slower to heal requiring lower intensity and careful monitoring.

    Aging skin: thinner, drier, less collagen/elastin, slower healing. Lower intensity. Conservative approach. Longer healing intervals. Not contraindicated but requires age-appropriate modification.

  5. Electrolysis Treatment and Analysis

    5. The proper way to attach a probe to the holder is:

    1. Leave the probe loose in the holder because tight connections restrict current flow to the follicle.
    2. Push the probe in with maximum force and twist 360 degrees to lock it permanently in place.
    3. Tape the probe to the outside of the holder, because its internal chuck connections are unreliable in all models.
    4. Insert the probe gently into the holder until it is securely seated verifying the connection before use.

    Answer: Insert the probe gently into the holder until it is securely seated verifying the connection before use.

    Probe attachment: gentle insertion until seated securely. Verify connection. Loose probes deliver inconsistent current and may dislodge during treatment. Tight = secure, not forced.

  6. Electrolysis Treatment and Analysis

    6. A voltmeter measures:

    1. Current flow (amperage) through the circuit conductor.
    2. Resistance (ohms) that opposes the flow of the current.
    3. Power consumption (wattage) in the circuit as a whole.
    4. Electrical pressure (voltage) between two circuit points.

    Answer: Electrical pressure (voltage) between two circuit points.

    Voltmeter: measures potential difference (voltage). Higher voltage overcomes higher resistance. Used in equipment calibration and troubleshooting.

  7. Client Consultation and Hair and Skin Analysis

    7. Skin tags (acrochordons) in the treatment area should be:

    1. Diagnosed by the electrologist, who must determine whether they are benign or malignant before proceeding.
    2. Treated with Galvanic current to dissolve the tag tissue chemically as a standard included part of the service.
    3. Noted in the client record and treated around; the electrologist should not attempt to remove them.
    4. Removed by the electrologist using the probe at maximum intensity to destroy the tissue stalk completely.

    Answer: Noted in the client record and treated around; the electrologist should not attempt to remove them.

    Skin tags: benign growths. Note in records, work around them. Electrologists do NOT remove skin tags; that is a medical procedure outside the scope of practice.

  8. Safety and Infection Control

    8. Waste segregation in electrolysis requires at minimum:

    1. A single lidded container for all waste, from used probes to gauze, gloves and packaging.
    2. A recycling bin for used probes, and one lidded container for gauze, gloves and packaging.
    3. Sharps container, biohazard container for blood-contaminated items, and regular waste.
    4. Only a sharps container, used for the probes, gloves, gauze, cotton and the packaging too.

    Answer: Sharps container, biohazard container for blood-contaminated items, and regular waste.

    Three-tier waste: (1) sharps (probes), (2) biohazard (blood-contaminated), (3) regular (non-contaminated). Proper segregation per local regulations.

  9. Safety and Infection Control

    9. The proper response to a failed autoclave biological indicator test is to:

    1. Continue using the instruments from the failed cycle and ignore the indicator.
    2. Recall all instruments processed since the last passing test and re-sterilize.
    3. Replace only the autoclave indicator strips and then reuse the instruments.
    4. Dispose of the autoclave permanently and replace it after one failed test.

    Answer: Recall all instruments processed since the last passing test and re-sterilize.

    Failed spore test: recall all since last PASS. Re-clean, re-sterilize. Service autoclave. Do not resume until passing test confirmed.

  10. Electrolysis Treatment and Analysis

    10. A client reports that treatment seems more painful during menstruation. The electrologist should:

    1. Refuse treatment during menstruation because it is a contraindication for all of the electrolysis modalities.
    2. Acknowledge that hormonal fluctuations can increase sensitivity and offer to reduce intensity or reschedule.
    3. Increase intensity to compensate for the perceived reduction in effectiveness during menstruation.
    4. Inform the client that menstruation has no physiological effect on pain perception or sensitivity.

    Answer: Acknowledge that hormonal fluctuations can increase sensitivity and offer to reduce intensity or reschedule.

    Hormonal fluctuations (menstruation, PMS): can increase skin sensitivity and pain perception. Acknowledge, offer reduced intensity or rescheduling. Not a contraindication.

Email me my score and the answer review (optional):

Get the full practice tests →

These ten are the free preview. The full bank is ten timed tests with a rationale on every question, one-time price, lifetime access.

Get the full practice tests →

What the full practice tests include

BTYGOAT is an independent prep resource and is not affiliated with the BBC, PSI, or the State of California. No question here is taken from a live examination.